BGA Solder Adapter
Give your BGA device legs and make it pluggable. Solder the BGA device to our adapter, which you then plug into our MiniGrid socket, or base adapter. Thus, this system has only slightly larger external dimensions than the BGA device, and thus takes much less space on your PC board to complete.
The BGA plug adapters are available in pitch 0.80 to 1.27mm.
The BGA solder adapters are available in pitch 0.40 to 1.27mm.
| Type | Series | Download | Download Additional | 3D / IGES / STEP |
|---|---|---|---|---|
| Plugable Adapter | ABGxxxx-xxxx-xxx55xx | |||
| Solderable Adapter | ABGxxxx-xxxx-xxxx5xxx |
MiniGrid Socket
Series: MGSxxxx-Exxx-xxxx5xx
The MiniGrid Socket is soldered to the target board and is designed to accept the BGA Solder Adapter (where the chip is soldered to the adapter board). As an alternative, this MiniGrid Socket is also designed to accept Test Sockets. E-tec offers any pin-out, configuration and grid size. Special terminal designs are possible on request.
SMT Solderball MGS Adapter
Series: MGSxxxx-SB01-xxxx5xx
The SMT Solderball MGS adapter emulates the package footprint and is easily installed using standard flux and reflow techniques. The solder ball adapters have the same solder ball types as the package’s they are emulating. You can combine the SMT foot with any of the E-tec Test socket styles shown in the Test Socket catalogue. The Test Socket is plugged into these adapter, which will be delivered with gold plated through hole pin and alignment plate for easy insertion. We offer any pin-out, configuration and grid size for pitch 0.8mm, 1.00mm and 1.27mm.
ZIF Test Sockel
Series: FCT-xxx-Xxxx-xx
The ZIF test Socket are used for functional and reliability high cycle testing for Flex Cables, Displays and Membrane keyboards. Depends on your application, the place on your board and the pitch, you can choose to fix the socket directly on your PCB with our different mounting options or connect your actual PCB with our test adapter with FFC / FPC interface flat cable. In order to provide you with the correct ZIF test socket for your Flex Cables, Displays and Membrane keyboards, we will ask you for device / FFC / FCP drawing, detailed information about the application, cable you are using as well as its dimensions, pitch and performance.
